Changing bath taps is usually a focused plumbing job, not a full bathroom project. A plumber to change bath taps will isolate the water supply, remove the existing taps, fit the replacements and check for leaks. A straightforward replacement typically takes 1-2 hours, although access and the condition of the pipework can affect the work.
It’s natural to want to know what to expect when a plumber arrives, especially if your bath taps are awkward to reach or leaking. Knowing the steps can help you prepare the bathroom and choose taps that suit the existing connections.
This article explains how a plumber removes old taps, what can make fitting new ones more involved, and what to consider when arranging the work. You’ll also learn what information to share beforehand, so the job can be planned clearly and the taps tested before the bath is used.
Key Takeaways
- A plumber isolates the water supply before removing old bath taps, then fits the replacements and checks the connections for leaks.
- Access beneath the bath and the condition of existing pipework can affect how straightforward the work is.
- Before arranging the job, choose taps that suit the bath’s existing connections and make the space beneath it accessible.
- Outside taps in the UK must comply with the Water Supply (Water Fittings) Regulations 1999, according to the UK legislation register.

Plumber to change bath taps
A plumber changing bath taps first identifies how the existing fittings connect to the water supply. The taps may be separate hot and cold fittings or a mixer. Their position, the pipework beneath the bath and access to it all affect removal and fitting. A plumber to change bath taps will also check whether the replacements suit the existing holes and connections.
Before work begins, the plumber can assess the tap arrangement and the space around it. A removable bath panel gives access to the pipework underneath. If the bath is boxed in, access may be restricted, making securing nuts and flexible connectors harder to reach. Mention if the panel is stuck, tiled over or difficult to remove, so access can be factored into the plan.
Choose replacement taps to suit the existing bath. Check the number and position of the tap holes, the fitting style and the connection arrangement. A mixer tap combines hot and cold water through one spout, while separate taps have individual controls. If you’ve chosen new taps, have them ready for the appointment and keep their fittings together.
The work generally follows a clear sequence:
- Isolate the water supply. The plumber shuts off the relevant supply and opens the taps to release water remaining in the pipework.
- Protect the work area. A cloth or suitable covering helps protect the bath and nearby surfaces while tools are used.
- Disconnect the old taps. The plumber reaches the connections beneath the bath, loosens them and removes the fittings from above.
- Prepare the fitting points. Old sealant and residue are cleared away so the new taps can sit cleanly against the bath.
- Fit and connect the replacements. The plumber secures the taps and reconnects the hot and cold supplies in the correct positions.
- Restore the supply and test. Water is turned back on, and the taps and connections are checked for leaks and correct operation.
Removal may take longer if a fixing nut is corroded or seized, or if the old tap is difficult to reach. A connector may also need attention if it is worn, damaged or poorly aligned. These issues may only become apparent once the old fittings are removed. RPH Plumbing can explain what they find and discuss any additional repair before proceeding.
After fitting, testing is just as important as installation. The plumber runs the hot and cold taps, checks that the handles move properly and inspects the joints beneath the bath while the water is flowing. Check the area again after use. A small drip at a connector may be easier to spot when the pipework is dry and visible.
When arranging the work, share the type of taps you’ve chosen, whether the bath has a removable panel and any signs of leaks or stiff controls. Clear items from around the bath and make sure the access panel is reachable. These preparations help the plumber assess the fittings and reach the connections without obstruction.
Bath taps and outside taps are different jobs. Outside taps in the UK must comply with the Water Supply (Water Fittings) Regulations 1999, according to the UK legislation register. That rule concerns outside taps, not a replacement bath tap; it is relevant if you are arranging separate work on an external tap.
Once fitted, the plumber runs the hot and cold taps, checks that the handles move properly and inspects the connections for leaks. Costs depend on the fittings chosen and the work required. Replacing bath taps in the UK typically costs £200–£320, including supply and fitting, while replacing existing taps in the UK costs £80–£200 for labour only. UK plumbers typically charge around £40–£60 per hour for a straightforward tap replacement, so the time needed can affect the labour charge.
A mixer tap replacement may have a different cost from replacing separate taps: replacing a mixer tap in the UK typically costs £140–£260, including supply and fitting. Any issue discovered once the old taps are removed can change the work needed. Ask RPH Plumbing to explain any extra work and its cost before agreeing to proceed, particularly if damaged pipework or a difficult connection is uncovered.
RPH Plumbing: Plumbing Services
RPH Plumbing provides plumbing services for homeowners replacing bath taps or dealing with leaking fittings. If your taps are stiff, dripping or due for an update, arranging a plumbing repair or replacement is a practical next step.
When you get in touch, describe the tap arrangement, the replacement fittings you’ve chosen and any access issues beneath the bath. For example, mention whether the bath panel can be removed or if you can see a leak around a connection. This information gives the conversation a clear starting point.
RPH Plumbing focuses on plumbing work, including bath taps and related pipework. Contact the team to discuss the work you need and request a free, no-obligation quote.
Plan the next step for your bathroom
Before arranging the work, decide what you want the new taps to improve. You might be replacing a dated style, making the controls easier to use or fixing a persistent drip. Knowing your priority helps focus your choice and gives the job a clear purpose.
If you need a plumber to change your bath taps, consider how the new fittings will look with the rest of the bathroom. A finish that suits your existing handles and shower fittings can make the update feel considered without changing the whole room. Keep the packaging and fitting instructions with the taps so they’re available when you discuss the work.
RPH Plumbing offers Plumbing Services for bath tap work. To take the next step, contact RPH Plumbing to discuss your bath taps. A clear description of what you’d like changed is a useful place to begin, and you can move ahead at a pace that suits your plans.
